Length edges
Put 1 if one long side needs edging. Put 2 if both long sides need edging. Put 0 if no long edges need edging.
Cut & edge services
Panels cut, edged and prepared from your cutting list.
For trades, fitters and homeowners who need a clear, workshop-backed cut and edge service from Moycullen, Co. Galway.
How it works
Send the list. We will price it properly.
Download the cutting list PDF, fill in your job details, panel sizes, quantities, material and edging requirements, then send it back to us for pricing.
The clearer the cutting list, the faster we can come back with a sensible price and lead time. Length should always be written first, then width.
Need worktops to go with the job? See our Egger worktop ranges, including bulk/trade pricing.
How to fill it in
Keep the list simple, but make the details exact.
The cutting list uses the same core fields every time: job details at the top, then description, quantity, length, width and edging per piece.
Material
Use the board material code, colour and thickness. Example: U702 Cashmere 18mm.
Edging colour and thickness
Use the edging code or colour and the required thickness. Most jobs will be 0.8mm, 1mm or 2mm edging.
Description
Write what the piece is: top, bottom, shelf, side panel, gable, filler, rail, drawer front or any clear part name.
Quantity
Write how many identical pieces are needed for that line.
Length and width
The easy rule: length runs with the grain.
Most decorative sheets are around 2800mm by 2070/2080mm. On timber grain boards, the grain normally runs along the 2800mm direction. That is the length. The cross-grain direction is the width.
Write sizes as: LENGTH x WIDTH
Example: 720 x 560 means 720mm with the grain and 560mm across the grain.
Edging guide
Use 0, 1 or 2 in the edge columns.
Edge L means the long sides of the part. Edge W means the short or cross-grain sides of the part.
Width edges
Put 1 if one short side needs edging. Put 2 if both short sides need edging. Put 0 if no short edges need edging.
Common entries
| Needed | Edge L | Edge W |
|---|---|---|
| No edging | 0 | 0 |
| One long edge | 1 | 0 |
| Two long edges | 2 | 0 |
| One long + one short | 1 | 1 |
| Edged all around | 2 | 2 |
Send us your cut list
Upload the completed PDF, or type your list directly below.
You can upload your completed cutting list, type the details straight into the table, or do both. PDF, JPG, PNG and WEBP files are accepted. We'll come back to you with a price.
Direct contact
+353 87 4055539
sales@topopal.ie
Workshop-backed service
Useful for fitters, trades and practical homeowners who already know what they need.
Cutting list PDF supplied
Panel cutting and edge requirements reviewed
Clear pricing based on the information provided
Collection or delivery details confirmed before production